‹ 연구 목록

공동주택에서의 소음전달경로 분석 및 층간소음 저감구조의 개발

Development of Interlayer Noise Reduction Structure through Sound Transmission Path Analysis in Apartment Buildings

연구 기간
2017.01 – 2020.02
발주 기관
미래창조과학부
연구 개요 Overview
본 연구는 바닥에만 집중하던 기존 대책에서 벗어나, 1) 실제 벽식 공동주택에서 바닥충격음의 전달 경로를 분석하고 이를 바탕으로 각 부재가 바닥충격음에 미치는 영향 정도를 규명하며, 2) 각 부재에 적용 가능한 비율을 도출한다.
This study departs from the existing countermeasures that focus only on the floor, and 1) analyzes the transmission path of the floor impact sound in an actual wall-type apartment, and based on this, the degree of influence of each member on the floor impact sound is identified, and 2) the ratio applicable to each member.
연구 내용 Research Content
심각한 사회적 이슈인 층간소음은 근본적으로 성숙된 공동체의식으로 극복해야 하지만, 공학적 관점에서 올바른 방향성을 가지고 보조적 해법을 제시해야 하는 문제이다. 그러나 벽식 구조 아파트의 층간소음에 대응하기 위해 기존에 시행되었던 바닥 두께를 증가시키는 방안은 실제로는 작은 면적의 실에서는 큰 효과를 보기 어려운 방법이다. 뿐만 아니라 바닥 이외의 부재에서 전달되는 소음의 기여율 비중도 상당히 크기 때문에 바닥에만 집중한 현재의 방법은 효율적이지 못하다고 할 수 있다. 따라서 본 연구는 바닥에만 집중된 기존의 대응방안에서 벗어나 1)실제 벽식 구조 아파트에서의 바닥충격음 전달경로를 분석하고 이를 토대로 바닥충격음에 대한 부재별 영향정도를 파악하여, 2)각 부재에 적용 가능한 비내력형 층간소음 저감 구조를 개발, 3)Test-Bed를 거쳐 실효성을 검증함과 동시에, 최종적으로 공동주택의 면적유형별/실별로도 균일한 층간소음 저감 성능을 확보하는 조합 구조를 제시하여 공학적으로 더욱 효과적인 해법을 제안하는 것을 목표로 한다.
Although inter-floor noise, a serious social issue, must be overcome with a mature sense of community, it is a problem that needs to be addressed with the right direction from an engineering point of view. However, the method of increasing the thickness of the floor, which has been implemented in the past to cope with the noise between floors in a wall-type apartment, is actually a method that is difficult to see a great effect in a small room. In addition, since the contribution rate of noise transmitted from members other than the floor is quite large, the current method focusing only on the floor is inefficient.

Therefore, this study departs from the existing countermeasures that focus only on the floor, and 1) analyzes the transmission path of the floor impact sound in an actual wall-type apartment, and based on this, the degree of influence of each member on the floor impact sound is identified, and 2) the ratio applicable to each member. By developing a load-bearing noise reduction structure, 3) verifying effectiveness through Test-Bed, and finally proposing a combination structure that secures uniform noise reduction performance between floors by area type/room of an apartment building and engineering It aims to propose a more effective solution.