‹ 연구 목록

초고층 건축공사의 최적 공정계획 시스템 개발

Development of optimal process planning system for high-rise building construction

연구 기간
2003.02.01 – 2007.12.31
발주 기관
국토교통부
연구 개요 Overview
초고층 건축공사의 공정계획 현황 및 문제점을 분석하여 최적 공정계획시스템을 개발하는 것을 목적으로 한다.
The purpose of this study is to develop an optimal process planning system by analyzing the current status and problems of the high-rise building construction process.
연구 내용 Research Content
초고층 건축공사의 공정계획 현황 및 문제점을 분석하여 최적 공정계획시스템을 개발하는 것을 목적으로 한다. 이에 대한 1단계 연구에서는 공정 리스크 요인에 관한 기존 연구를 분석하고 국내 건설사가 시공한 국내 · 외 초고층 건축물의 공정변이 사례를 분석하며 전문가 자문을 통한 초고층 공정계획 현황 및 문제점을 도출한다. 2단계 연구에서는 공정산정에 관한 기존 연구와 층별 · 공종별 공기산정 알고리즘과 전체 공기산정 알고리즘을 개발한다. 3단계 연구에서는 공정계획에 관한 기존 연구를 분석하고 초고층 건축 공정계획 절차 모델을 검토하며 초고층 건축 공정계획 입출력 정보와 공기결정 요인별 time-cost trade-off 함수를 규명하여 공정 최적화 알고리즘을 개발한다. 4단계 연구에서는 최적 공정계획 시스템 프로토타입을 설계 · 개발하고 사례 적용 및 적정성 검토를 거친 후 시스템 활용성 제고방안을 제시한다.
The purpose of this study is to develop an optimal process planning system by analyzing the current status and problems of the high-rise building construction process. In the first phase of this study, existing research on process risk factors, process variations of domestic and foreign skyscrapers constructed by domestic and foreign construction companies are analyzed. The status and problems of the skyscraper process plan are derived through expert advice. In the second stage research, we develop the existing research on process estimation, the air calculation algorithm for each floor and construction type, and the total air calculation algorithm. In the third stage research, the process optimization algorithm is developed by analyzing the existing research on process planning, reviewing the high-rise building process planning procedural model, and identifying the input/output information of the high-rise building process plan and the time-cost trade-off function for each time-determining factor. In the fourth stage of the study, a system usability improvement plan is proposed after designing and developing an optimal process plan system prototype, applying cases and reviewing adequacy.