‹ 연구 목록

작업 유형별 건설 피지컬 AI 자율작업 엔드투엔드 프로세스 구축 및 실증: 데이터 수집에서 모델 배포까지

Task-Specific End-to-End (E2E) Process for Autonomous Construction Physical AI: From Data Collection to Model Deployment

연구 기간
2026.03.01 – 2031.02.28
발주 기관
한국연구재단
연구 내용 Research Content
본 연구는 건설 작업을 위한 피지컬 AI 도입을 위해, 데이터 수집부터 모델 학습, 평가, 배포 및 운영에 이르는 엔드투엔드(End-to-end) 프로세스를 정립하고, 다양한 건설 숙련작업 유형별로 표준화된 피지컬 AI 개발프로세스를 제시하는 것을 목표로 한다. 이를 위해, 먼저 건설 숙련작업을 두 가지 축(도구-작업면 간 접촉 유무와 작업 시퀀스 길이)에 따라 서로 다른 네 가지 유형으로 구분하여, 각 유형에 적합한 최적의 데이터 수집·모델 학습 전략을 제시한다. 또한, 이러한 전략이 각 작업 유형별 대표공종(타일 설치·퍼티·분체 도장·미장)을 대상으로 시공 품질 기준을 만족하는 로봇 자율작업으로 구현되는지 실증(PoC)한다. 구체적으로, 숙련공시연 데이터 수집 방식을 세 가지 표준화된 유형으로 정립하고, 이에 대응하는 학습 모델을 두 가지 표준화된 구조로 구축한다. 이후, 작업 유형별로 시연·학습·평가의 검증 루프를 반복 수행함으로써, 각 유형에 대해최적의 시연 데이터 수집 방식과 로봇 정책 학습 전략을 도출한다. 마지막으로, 이렇게 검증·축적된 시연 데이터와 정책 모델을 배포하고, 유사작업 환경에서 피지컬 AI의 성능을 지속적으로 검증하고 개선한다. 본 연구는 건설 현장의 높은 복잡성과 변동성에 대응 가능한 실질적인 자율작업 구현을 위해, 로봇이 환경과 맥락을 이해하여 작업을 수행할 수 있는,즉 여러 상황에 범용적인 건설 특화 피지컬 AI의 실현 가능성을 제시한다. 나아가, 작업 유형에 따른 체계적이고 반복적인 검증 과정을 통해, 새로운 건설 작업이 주어졌을 때, 해당 작업을 위한 피지컬 AI 성능을 극대화하기위해 어떤 데이터를, 어떻게 수집하고, 어떻게 학습해야하는지에 대한 일반화 가능한 방법론을 제시한다.
This study aims to establish an end-to-end process for introducing physical AI in construction work, covering everything from data collection to model training, evaluation, deployment, and operation, and to present a standardized physical AI development process tailored to various types of skilled construction tasks. To this end, construction proficiency tasks are first classified into four distinct types based on two axes (whether contact occurs between the tool and the work surface, and the length of the work sequence), and optimal data collection and model training strategies are proposed suitable for each type. In addition, this strategy will be demonstrated through a proof of concept (PoC) to verify whether it can be implemented as robot autonomous work that meets construction quality standards for representative trades of each work type (tile installation, putting, powder coating, and plastering). Specifically, the data collection method for skilled worker demonstration data is established in three standardized types, and corresponding learning models are built in two standardized structures. Subsequently, by repeatedly performing the validation loop of demonstration, learning, and evaluation for each type of task, the optimal method for collecting demonstration data and a robot policy learning strategy are derived for each type. Finally, deploy the validated and accumulated demonstration data and policy models, and continuously verify and improve the performance of physical AI in similar work environments. This study proposes the feasibility of construction-specialized physical AI that enables robots to understand their environment and context and carry out tasks, thereby enabling practical autonomous operation capable of responding to the high complexity and variability of construction sites. Furthermore, through a systematic and iterative validation process tailored to the type of task, it proposes a generalizable methodology for determining what data should be collected, how it should be collected, and how it should be trained to maximize the physical AI performance of a new construction task when assigned.
키워드 Keywords
건설 로봇 및 자동화(Construction Robotics & Automation)피지컬 AI(Physical AI)숙련 작업 시연(Skilled Task Demonstration)